High Shear Mixer

 

Model: SMG

Category: Pharmaceutical Equipment

Exhibitor: YENCHEN MACHINERY CO., LTD.

Booth No: L410

 

Characteristic

 

1. Follows the regulations of cGMP, PIC/S GMP, FDA.
2. High uniformity of mixing: Even with big difference of bulk density of powder still can mix very well. Binder (solution) can be sprayed from pressure tank (or solution tank) to powder by the spray nozzle.
3. High Shear Mixer Operates just in Short mixing time.
　3a. Dry mixing: 2~5 minutes.
　3b. Granulation: 5~10 minutes.
4. Multi-safety Interlock System:
　4a. Stop operation when the cover is not closed properly.
　4b. Stop operation when the cover of discharge valve is not closed properly.
　4c. Stop operation when the air pressure is not sufficient for the seal.
5. Separated compressed air routes of the High Shear Mixer is especially designed to meet the good air quality: the compressed air for air seal will pass through an air filter. For the cylinder, the compressed air will pass through lubricating oil to ensure the air quality and lubrication.
6. Equipped with unique design of the air seal: This design can prevent powder access into the main seal and the chopper to prevent powder dropping.
7. The clearance between impeller and the bottom of mixing bowl is only about 0.5~0.8 mm; therefore, high mixing efficiency can be achieved.
8. Clamps of the cover: special designed by an eccentric wheel of clamps for easy operation and well sealed.

 

Other Products

 

• 

  Tablet Coating Machine

• 

  Fluid Bed Dryer / Granulator / Coater

• 

  Spray Dryer

• 

  Roller Compactor

• 

  Cone Mill

• 

  Through Circulation Dryer, Single Pass Dryer

• 

  Extraction, Concentration, Granulation Turnkey Equipment

• 

  BIN (IBC) and BIN System

• 

  Low Temperature Pulverizer - Cloud Mill

 

 

 

Back